You have no items to compare.
Starting at: $1.02
A – Loctite 221
E – Anti-Seize
I – Lithium-Base Grease
O – Engine Oil
a – With 2 rings, Standard;
b – With 2 rings, 1st Oversize;
c – With 2 rings, 2nd Oversize;
d – Standard Size;
e - 1st Oversize;
f – 2nd Oversize;
g – ATTENTION: Use only once
Starting at: $1.19
B – Loctite 243
E – Loctite Anti-Seize 15378
AR – As required
e – For cylinder head;
f – For EGT sensor;
g – For exhaust gas temperature (EGT);
h – For thermo couple NiCr-Ni K;
i – Stainless, for EGT sensor;
j – With service reset button and USB-connector;
k – See Service Instruction SI-912-020 / SI-914-022 current issue
Starting at: $0.00
C – Loctite 648
E – Loctite Anti-Seize 15378
a – Marked with S/N;
b – Stainless;
c – In a roll, Tube 125 mm (4.92 in.);
d – With imprinting "oil";
e – See Service Instruction SI-914-022 current issue;
f – With additional internal bracket from engine S/N 914F 4,420.437;
g – With lubricaiton hole for waste gate shaft
Starting at: $0.00
B – Loctite 243
E – Anti-Seize
I – Lithium-Base Grease
O – Engine Oil
a – From engine S/N 582 UL Mod. 90 5,236.549 piston for monohook circlip configuration (see also SI-2ST-001);
b – With 2 rings, standard;
c – With 2 rings, 1st oversize;
d – with 2 rings, 2nd oversize;
e – Standard size;
f – 1st oversize;
g – 2nd oversize;
h – For use with piston Part No. 888 590 (Also see SI-2ST-001);
i – Use only once
Starting at: $0.00
A – Loctite 221
C – Loctite 648
E – Loctite Anti-Seize
I – Lithium-Base Grease
AR – As required
a – Replace layshift gear 55 T and pinion shaft 21 T only together;
b – Replace layshift gear 57 T and pinion shaft 19 T only together;
c – Replace layshift gear 59 T and pinion shaft 17 T only together;
d – Replace layshift gear 60 T and pinion shaft 15 T only together;
e – Attention: Left handed thread;
f – Coupling-flange Part No. 958 971 and oil-seal Part No. 950 084 has to be used together;
h – Gear set and splitted cone sleeve 847 757 must be used together. Also see SI-2ST-007
Starting at: $0.00
A – Loctite 221
C – Loctite 648
E – Loctite Anti-Seize
H – Loctite 603
I – Lithium-Base Grease
Q – 732 RTV
AR – As required
a – Replace layshift gear 55 T and pinion shaft 21 T only together;
b – Replace layshift gear 57 T and pinion shaft 19 T only together;
c – Replace layshift gear 59 T and pinion shaft 17 T only together;
d – Replace layshift gear 60 T and pinion shaft 15 T only together;
e – Attention: Left handed thread;
f – Coupling-flange Part No. 958 971 and sealing ring Part No. 950 084 has to be used as a set;
h – Gear set and splitted cone sleeve must be used together;
|| – NOTE: Included starter relay;
See also SI-2ST-007