Search results for '12V Self-Contained Anti-Collision/Beacon'

A – Loctite 221
I – Lithium-Base Grease

 

a – For configuration free-air-cooled;
b – In a roll/Sold per meter (39");
c –  For magneto flywheel new version (with closed cage), Torx screw also valid for old version. At disassembly and reassembly of the screw, the thread has to be cleaned of the remaining coating and secure with Loctite 221. As an alternative a new screw can be used.

A – Loctite 221
C – Loctite 648
I – Lithium-Base Grease

 

a – From engine S/N 582 UL DCDI mod. 90: 4,015.239, 582 UL DCDI mod. 99: at serial production;
b – For ignition circuit 1;
c – For ignition circuit 2;
d – Up to engine S/N 582 UL DCDI mod. 90: 4,015.238;
e – From engine S/N 582 UL DCDI mod. 90: 4,015.239, 582 UL DCDI mod. 99: at serial production;
f – Sold by the meter (39");
g – Without rewind starter

Previous Part Numbers: 297 431, 297 434

NOTE: This tank has dual outlets that will require an additional on/off valve.

Microburst II with Taillight Kit, 1 each MB2R (red), MB2G (green)

Microburst I Nav Taillight (white)

Microburst III Kit, 1 each MB3R (red) & MB3G (green)

Microburst II Kit, 1 each MB2R (red) & MB2G (green)

Multi-Purpose Gear Lube 4096, SAE 80W-90

1" Rubber Radiator Hose

Previous Part Number: H9133

Previous Part Number: H9133

This preheat system applies heat to strategic locations on the engine including the cylinder heads, crankcase, and oil tank. The kit comes complete with all heating elements, heavy duty wiring harness with 120 volt plug, installation instructions and documentation.

E – Loctite Anti-Seize

AR – As required

a – Without hooks;
b – With hooks;
c – See also SI-2ST-002

C – Loctite 648
E – Loctite Anti-Seize 15378

a – Certified part;
b – 360° anular ring (torus-shaped)

E – Loctite Anti-Seize

AR – As required

a – Without hooks;
b – With hooks;
c – See also SI-2ST-002

E – Anti-Seize

a – Without hooks, b – With hooks, c – See also SI-2ST-002

Previous part numbers: H4163

Non-flammable and petroleum-distillate-free Extreme Simple Green is a safer alternative to caustic cleaning solvents, meaning improved safety for your working environment. All of the components are biodegradable, so Extreme Simple Green won’t accumulate in the environment and rinse-waste can be handled by standard waste water treatment methods. Extreme Simple Green meets or exceeds current and reasonably anticipated VOC requirements. It also contains no Clean Air Act Hazardous Air Pollutants (HAPs), nor is it a RCRA hazardous waste in and of itself when disposed.