Search results for 'SPARK PLUGS AND ACCESSORIES'

AR – As required

AR – As required

a – If installed with filter on top;
b – If installed with filter on bottom;
c – not available as a spare part

A – Loctite 221
C – Loctite 648
E – Loctite Anti-Seize
I – Lithium-Base Grease

AR – As required

a – Exchange drive gear 19 T and dog gear 49 T only together;
b – Exchange drive gear 21 T and dog gear 47 T only together;
c – Exchange drive gear 20 T and dog gear 40 T only together.

A – Loctite 221
C – Loctite 648
E – Loctite Anti-Seize
I – Lithium-Base Grease

AR – As required

a – Replace layshift gear 55 T and pinion shaft 21 T only together;
b – Replace layshift gear 57 T and pinion shaft 19 T only together;
c – Replace layshift gear 59 T and pinion shaft 17 T only together;
d – Replace layshift gear 60 T and pinion shaft 15 T only together;
e – Attention: Left handed thread;
f – Coupling-flange Part No. 958 971 and oil-seal Part No. 950 084 has to be used together;
h – Gear set and splitted cone sleeve 847 757 must be used together. Also see SI-2ST-007

A – Loctite 221
C – Loctite 648
E – Loctite Anti-Seize
H – Loctite 603
I – Lithium-Base Grease
Q – 732 RTV

AR – As required

a – Replace layshift gear 55 T and pinion shaft 21 T only together;
b – Replace layshift gear 57 T and pinion shaft 19 T only together;
c – Replace layshift gear 59 T and pinion shaft 17 T only together;
d – Replace layshift gear 60 T and pinion shaft 15 T only together;
e – Attention: Left handed thread;
f – Coupling-flange Part No. 958 971 and sealing ring Part No. 950 084 has to be used as a set;
h – Gear set and splitted cone sleeve must be used together;
|| – NOTE: Included starter relay;
See also SI-2ST-007

a – For internal hex. screw;
b – To remove the gear cover;
c – To compress the dog gear;
d – For drive gear, I=2,00, I=2,24, I=2,58;
e – For oil seal 850055;
f – For gearbox configuration "B";
g – For oil seal 930715;
h – For oil seal 950085 and 950084;
i – For oil seal 933675;
j – To remove the layshaft gear; 
k – To remove the flywheel; 
l – For mounting the hardy disk;
m – For gearbox configuration "C";
n – For gearbox configuration "E"

AR – As required

a – For specific use see installation sheet;
b – Use at intake silencer version;
c – For 582 UL mod. 90 without fresh oil injection;
d – With fresh oil injection