You have no items to compare.
Starting at: $28.10
B – Loctite 243
AR – As required
Starting at: $0.12
A – Loctite 221
Q – Silastic 732 RTV
AR – As required
a – Cooling surface 3,2 dm2 (49,6 in2);
b – From engine S/N: 3,916.823;
c – Up to engine S/N: 4,916.822;
d – For evacuation of air, at installation of engine with spark plugs down;
e – Longer studs for 582 UL Mod. 90. Not used on 582-99;
f – Sold by the meter (39”)
Starting at: $0.12
A – Loctite 221
Q – Silastic 732 RTV
AR – As required
a – Cooling surface 2,4 dm2 (37.2 in2);
b – From engine S/N: 3,916.823;
c – Up to engine S/N: 4,916.822;
d – For evacuation of air, at installation of engine with spark plugs down;
e – Longer studs for 582 UL Mod. 90;
f – Sold by the meter (39")
Starting at: $0.12
A – Loctite 221
B – Loctite 243
Q – Silastic 732 RTV
AR – As required
a – Cooling surface 3,2 dm2 (49,6 in2);
b – From engine S/N: 3,916.823;
c – Up to engine S/N: 4,916.822;
d – For evacuation of air, at installation of engine with spark plugs down;
e – Longer studs for 582 UL Mod. 90. Not used on 582-99;
f – Sold by the meter (39”)
Starting at: $1.59
a – For installation of cylinder on the piston 67.5 mm;
b – For installation of cylinder on the piston 72 mm;
c – To hold the fan;
d – For aligning of cylinders at the intake flange;
e – For crankshaft bearing PTO side;
f – For positioning of crankshaft bearing PTO side;
g – For centering of the stator plate;
h – For piston pin 18 mm;
i – For installation of piston pin circlip 18 mm;
j – For the engine;
k – Without ignition and externals
Starting at: $0.12
a – RED 67.50 MM - 67.51 MM, GREEN 67.51 - 67.52 MM;
b – Cylinder PTO side;
c – Cylinder MAG side
Starting at: $1.54
a – Useable for engine type 447 UL, 503 UL, 582 UL 90/99 and 618 UL;
b – For adjustment and control of the ignition timing;
c - To cover the crankcase;
d – To hold the oil pump gear;
e – To hold the magneto flywheel;
f – For magneto fly wheel;
g – For ball bearing 6206, crankshaft magneto side;
h – For ball bearing 6207, crankshaft;
i – For ring halves;
j – For puller;
k – For crankshaft PTO side;
l – For crankshaft magneto side;
m – For ball bearing
Starting at: $0.17
b – For mixture lubrication;
c – For oil pump version
Starting at: $0.17
B – Loctite 243
I – Lithium-Base Grease
a – In a roll/Sold by the meter (39")
Starting at: $0.17
B – Loctite 243
I – Lithium-Base Grease
a – In a roll/Sold by the meter (39")
Starting at: $0.00
A – Loctite 221
B – Loctite 243
C – Loctite 648
D – Loctite 574
J – Molykote 44 Medium
c – Up to engine S/N 582 UL Mod. 90 4,172.691 (see also SI-08-1994);
d – From engine S/N 582 UL Mod. 90 4,172.692 (see also SI-08-1994)
Starting at: $0.00
B – Loctite 243
E – Anti-Seize
I – Lithium-Base Grease
O – Engine Oil
a – From engine S/N 582 UL Mod. 90 5,236.549 piston for monohook circlip configuration (see also SI-2ST-001);
b – With 2 rings, standard;
c – With 2 rings, 1st oversize;
d – with 2 rings, 2nd oversize;
e – Standard size;
f – 1st oversize;
g – 2nd oversize;
h – For use with piston Part No. 888 590 (Also see SI-2ST-001);
i – Use only once