Search results for 'Ignition Parts'

A – Loctite 221
Q – Silastic 732 RTV

AR – As required

a – Cooling surface 3,2 dm² (49,6 in²);
b – From engine S/N: 3,916.823;
c – Up to engine S/N: 4,916.822;
d – For evacuation of air, at installation of engine with spark plugs down;
e – Longer studs for 582 UL Mod. 90. Not used on 582-99;
f – Sold by the meter (39”)

B – Loctite 243
C – Loctite 648
L – Klueber Isoflex Topas Nb5051
O – Engine Oil
P – Loctite 5910

a – marked with S/N; 
b – Only for model 2 and 4; 
c – Tolerance group "C" 1.820 - 1.829 mm;
d – Tolerance group "D" 1.830 - 1.839 mm; 
e – Depending on configuration use 14 studs P/N 840752 M8x201 or 8 studs M8x201 and 6 studs P/N 840754 m8x210;
f – See Overhaul Manual of the respective engine type, current issue;
g – Only for use with new cylinders 913221 with countersunk. With the cylinder 913225 the countersunk was already introduced starting from beginning of the production;
h – See the following Service Instruction current issue SI-914-021.

B – Loctite 243

a – Note Service Instruction SI-912-005 current issue

a – For internal hex. screw;
b – To remove the gear cover;
c – To compress the dog gear;
d – For drive gear, I=2,00, I=2,24, I=2,58;
e – For oil seal 850055;
f – For gearbox configuration "B";
g – For oil seal 930715;
h – For oil seal 950085 and 950084;
i – For oil seal 933675;
j – To remove the layshaft gear; 
k – To remove the flywheel; 
l – For mounting the hardy disk;
m – For gearbox configuration "C";
n – For gearbox configuration "E"

A – Loctite 221
I – Lithium-Base Grease

a – For configuration free-air-cooled;
b – In a roll/Sold per meter (39");
c –  For magneto flywheel new version (with closed cage), Torx screw also valid for old version. At disassembly and reassembly of the screw, the thread has to be cleaned of the remaining coating and secure with Loctite 221. As an alternative a new screw can be used.