You have no items to compare.
Starting at: $0.00
A – Loctite 221
B – Loctite 243
C - Loctite 648
c – Tighten to leave 1mm distance between starter cover and electric starter
Starting at: $0.00
AR – As required
a – Bushing not available as spare part, use drive housing assy. 866880;
b – End frame with sleeve, not available as spare part, use end frame assy. 866900;
c – Bushing, not available as spare part, use drive housing assy. 866900;
d – brush, not available as spare part, use brush holder assy. 866890;
e – Spring, not available as spare part, use brush holder assy. 866890.
Starting at: $0.00
AR – As required
a – For specific use see installation sheet;
b – Use at intake silencer version;
c – For 582 UL mod. 90 without fresh oil injection;
d – With fresh oil injection
Starting at: $0.21
AR – As required
a – Brush not available as spare part, use brush holder assembly 866891
Starting at: $0.18
A – Loctite 221
E – Anti-Seize
I – Lithium-Base Grease
O – Engine Oil
a – With 2 rings, Standard;
b – With 2 rings, 1st Oversize;
c – With 2 rings, 2nd Oversize;
d – Standard Size;
e - 1st Oversize;
f – 2nd Oversize;
g – ATTENTION: Use only once
Starting at: $0.12
a – RED 67.50 MM - 67.51 MM, GREEN 67.51 - 67.52 MM;
b – Cylinder PTO side;
c – Cylinder MAG side
For Rotax 912iS, 912ULS, 912UL, 618, 503, 447, 377, 277
Previous part number 938-795
Starting at: $0.00
447 UL – 29.5 kW
503 UL – 34 kW
582 UL
a – Base carburetor for air-cooled engines with bowden cable choke. NOTICE carburetor without calibration. From engine S/N 447 UL: 3,940.675, 503 UL: 4,795.201;
b – Base carburetor for liquid cooled engines with bowden cable choke. NOTICE carburetor without calibration; From engine S/N 582 UL Mod. 90: 4,656.088, 582 UL mod. 99: starting with serial production;
c – Carburetor housing, not available as spare part, use carburetor assy.;
d – Jet-needle, see carburetor calibration sheet;
e – Idle-jet, see carburetor calibration sheet;
f – Needle-jet, see carburetor calibration sheet;
g – Main-jet, see carburetor calibration sheet;
h – Only necessary on high altitude compensation kit (not available anymore)
Starting at: $0.12
I – Lithium-Base Grease
X – Adhesive
AR – As required
Starting at: $0.00
A – Loctite 221
I – Lithium-Base Grease
a – For configuration free-air-cooled;
b – In a roll/Sold per meter (39");
c – For magneto flywheel new version (with closed cage), Torx screw also valid for old version. At disassembly and reassembly of the screw, the thread has to be cleaned of the remaining coating and secure with Loctite 221. As an alternative a new screw can be used.
Starting at: $0.00
AR – As required
a – Air guide, carburetor side;
b – Air guide, exhaust side