You have no items to compare.
Starting at: $0.00
A – Loctite 221
B – Loctite 243
C - Loctite 648
c – Tighten to leave 1mm distance between starter cover and electric starter
Starting at: $0.00
AR – As required
a – Bushing not available as spare part, use drive housing assy. 866880;
b – End frame with sleeve, not available as spare part, use end frame assy. 866900;
c – Bushing, not available as spare part, use drive housing assy. 866900;
d – brush, not available as spare part, use brush holder assy. 866890;
e – Spring, not available as spare part, use brush holder assy. 866890.
Starting at: $0.21
AR – As required
a – Brush not available as spare part, use brush holder assembly 866891
Starting at: $0.18
A – Loctite 221
E – Anti-Seize
I – Lithium-Base Grease
O – Engine Oil
a – With 2 rings, Standard;
b – With 2 rings, 1st Oversize;
c – With 2 rings, 2nd Oversize;
d – Standard Size;
e - 1st Oversize;
f – 2nd Oversize;
g – ATTENTION: Use only once
Starting at: $0.12
a – RED 67.50 MM - 67.51 MM, GREEN 67.51 - 67.52 MM;
b – Cylinder PTO side;
c – Cylinder MAG side
Starting at: $0.12
I – Lithium-Base Grease
X – Adhesive
AR – As required
Starting at: $0.00
A – Loctite 221
I – Lithium-Base Grease
a – For configuration free-air-cooled;
b – In a roll/Sold per meter (39");
c – For magneto flywheel new version (with closed cage), Torx screw also valid for old version. At disassembly and reassembly of the screw, the thread has to be cleaned of the remaining coating and secure with Loctite 221. As an alternative a new screw can be used.
Starting at: $0.00
AR – As required
a – Air guide, carburetor side;
b – Air guide, exhaust side